|
Adhesives
| Industrial Adhesives
|
Product
|
Description |
CONAPOXY® AD-10
|
CONAPOXY® AD-10 is a
unique single component epoxy that may be used as
a structural adhesive or miniature electronic
potting compound. The heat-cure formulation was
designed for rapid cure at temperatures as low as
200ºF, yet it exhibits good storage life at room
temperature. Good dielectric properties and
thermal stability make this epoxy ideal for
electrical applications up to 150ºC. |
CONAP® AD-1146 ,
AD-1147, AD-1146-C and AD-1147-C
|
CONAP® AD-1146 and
AD-1147 are high strength adhesives for
bonding liquid urethanes to various substrates
during the curing process. These systems are a
stable solution of polymers in a solvent blend
which requires heat to effect cure. An extensive
evaluation program has shown AD-1146 and AD-1147
to be capable of bonding an exceptional variety of
inorganic and organic materials together. Bonds to
aluminum alloys, magnesium, iron, steel, glass,
glass-fiber laminates, wood, and leather have high
strength and excellent resistance to hydrolysis
and environmental extremes. CONAP®
AD-1146-C and AD-1147-C are based on the same
formulation as CONAP® AD-1146, with
lower solids content and lower viscosity. They too
offer exceptional peal strength values, however,
AD-1146-C and AD-1147-C require two coats for
optimum strength. |
CONAP® AD-1161
|
CONAP®AD-1161 is a
single component primer formulated for use in
bonding polyurethanes to polyvinyl chloride (PVC)
during the process of curing the polyurethane. It
is primarily intended for use with polyurethane
systems that meet the requirements of MIL-M-24041,
MIL-P-46076A,and MSFC-SPEC-292A. Peel strengths of
30 pounds per inch of width are obtained
consistently with CONATHANE®EN-1554
and CONATHANE®EN-1556. |
CONAP® PR-1167
|
CONAP® PR-1167 is a
single component primer formulated for use in
bonding liquid polyurethane molding and potting
compounds to substrates such as cured or liquid
polyurethanes, neoprene rubber and cadmium plated
metals, to name a few. |
|
| Filtration Adhesives / Sealants
|
Product
|
Description |
CONATHANE® FP-1301
|
CONATHANE® FP-1301 is
an unfilled two-component urethane system designed
for use as a sealant. |
CONATHANE® FP-1302
|
CONATHANE® FP-1302 is
a two-component, room temperature curing flexible
polyurethane elastomer system. |
CONATHANE® FP-1303
|
CONATHANE®FP-1303
White or Amber is a two-component, unfilled, fast
setting polyurethane sealant designed for use in
HEPA and other air filtration devices. CONATHANE
® FP-1303 is also used for potting,
casting, embedding, and encapsulating of
electronic circuits, components, and power
devices. |
CONATHANE® FP-1304
|
CONATHANE® FP-1304 is
a two-component thixotropic urethane system
designed for use as a sealant. |
CONATHANE® FP-1305
|
CONATHANE®FP-1305 is a
two-component, non-TDI, liquid polyurethane
casting system produced under very carefully
controlled conditions. This elastomeric system
features excellent toughness, water resistance,
and physical properties. |
CONATHANE® FP-1306
|
CONATHANE® FP-1306 is
a two-component urethane system designed for use
as a sealant. |
CONATHANE® FP-1307
|
CONATHANE® FP-1307 is
a two-component, unfilled, thixotropic urethane
system designed for use as a sealant. |
|
| EASYPOXY® Adhesives / Sealants
|
Product
|
Description |
EASYPOXY® K-20 and
K-22
|
These two
EASYPOXY® Kits are general
purpose, two-component, room temperature curing
adhesive/sealants that bond a great variety of
surfaces. They are relatively insensitive to
mixing ratios. Since there are no solvents, there
is no fire hazard. They are non-toxic when cured
and they are widely used for bonding, sealing and
repairing metal, wood, rubber, and most plastics. |
EASYPOXY® K-45
|
EASYPOXY® K-45 is a
100% solids, two-component, paste adhesive, mixed
at a 1 to 1 ratio by weight or by volume and
offers a quick set time of 4-6 minutes at room
temperature. K-45 is designed for bonding steel,
aluminum, glass, wood, cork, fabrics, ceramics,
and most hard plastics. Electrical insulation
properties of K-45 are good and it has good
optical clarity in thin bond lines. |
EASYPOXY® K-230
|
EASYPOXY® K-230
Optically Clear Kit is a two-component, 100%
solids system, which is used in thin films to bond
glass. This adhesive is recommended for bonding
substrates with widely different coefficients of
expansion because of its cured resiliency. This
same resiliency favors bonding elastomeric to
rigid substrates. Its neutral color is an
advantage where the bond line should not be
noticeable. |
|
|