|
Complimentary Products
| Solvents |
Product
|
Description |
Surface Preparation Guide
For
Adhesives, Sealants & Coatings AC-107
|
For most
applications, good bonding may be obtained by the
following surface preparation: solvent degreasing
with trichlorothylene or solvent wash with acetone
or methyl ethyl keytone; mechanical abrasion
either by sandblasting or roughing with medium
grit emery paper; additional solvent degreasing or
solvent wash to remove grit contamination. (SEE
CAUTION ON PAGE 2). |
CONAP® S-1
|
CONAP® S-1, solvent
and thinner is designed for dilution of
CONAP® AD-1146,
AD-1147
primer series for brush, dip and spray
applications. It contains powerful solvents, but
has a fairly short retention time. S-1 can also be
used for clean up. |
CONAP® S-8
|
CONAP® S-8, solvent
and thinner, is designed for dilution of
CONATHANE® urethane conformal coatings
for both dip and spray applications. It contains
powerful solvents, but has a fairly short
retention time. |
CONAP® S-13
|
CONAP® S-13, solvent
and thinner is designed for dilution of
CONAP® CE-1170
conformal coating for both dip and spray
applications. It contains powerful solvents but
has a fairly short retention time. S-13 can also
be used for cleanup. |
CONAP® S-22
|
CONAP® S-22, solvent
and thinner is designed for dilution of of
CONATHANE® urethane conformal coatings
for both dip and spray applications, in particular
CONAP® CE-1171.
CONAP® S-22 complies with California
EPA Rule 66. |
|
| Mold Releases - Water Based
|
Product
|
Description |
CONAP® MR-5014
|
CONAP® MR-5014
water-based mold release is environmentally
friendly and provides excellent release for
virtually all polyurethane materials as well as
epoxy and other resin systems that require an
external mold release. |
|
| Mold Releases |
Product
|
Description |
CONAP® MR-5002
|
CONAP® MR-5002 is a
low viscosity, silicone based liquid mold release
and parting agent. It gives excellent release
characteristics for simple and complex potting,
casting, and molding operations. |
CONAP® MR-5012
|
CONAP® MR-5012 is a
very low viscosity liquid mold release and parting
agent. It is based on heavy-duty silicones and
gives excellent release characteristics for simple
and complex potting, casting, and molding
operations. |
CONAP® MR-5016
|
CONAP® MR-5016 is a
non-flammable, low viscosity liquid mold release
and parting agent. It is based on silicone
polymers and gives excellent release
characteristics for simple and complex potting,
casting, and molding operations. |
|
| Miscellaneous |
Product
|
Description |
CONAP® Dri-Purge
|
CONAP® Dri-Purge is an
inert dry gas blanket used to displace
moisture-laden atmospheric air in opened
containers of CONATHANE® polyurethane resins and
compounds. It helps to extend the shelf-life of
those moisture sensitive materials.
Dri-Purge is also useful in protecting all
moisture sensitive resins from contamination. |
|
| Color Concentrates |
Product
|
Description |
CONAP® DS-1830
|
The
CONAP® DS-1830 Series of color
concentrates contains stable pigments to provide
ultimate resistance to heat and light. The unique
feature of the DS-1830 SERIES is that it is very
compatible for use in both epoxy and urethane
systems. These color dispersions have been
designed to mix equally well with either low or
high viscosity systems. |
|
|